英语翻译The leakage pressure testing is performed with water at room temperature(18-28°C).For spring band clamps with a nominal of up to 60mm the test combination(pictre 4) includes one ground,beadless testing mandrel,one testing hose with a len
来源:学生作业帮助网 编辑:六六作业网 时间:2024/05/23 22:56:42
英语翻译The leakage pressure testing is performed with water at room temperature(18-28°C).For spring band clamps with a nominal of up to 60mm the test combination(pictre 4) includes one ground,beadless testing mandrel,one testing hose with a len
英语翻译
The leakage pressure testing is performed with water at room temperature(18-28°C).For spring band clamps with a nominal of up to 60mm the test combination(pictre 4) includes one ground,beadless testing mandrel,one testing hose with a length of 10mm and the to be tested spring band clamp.The leakage pressure test needs to be performed with the hose-fitting-combination mentioned below.In order to get a interference fit,the fitting diameter has to be adjusted to the inside diameter of the hose,The overlapping of the diameter should not exceed a maximum of 0.5mm.EPDM hoses-hoses with an aramide texture and a hardness of 65 +/- Shore A-are being used.
英语翻译The leakage pressure testing is performed with water at room temperature(18-28°C).For spring band clamps with a nominal of up to 60mm the test combination(pictre 4) includes one ground,beadless testing mandrel,one testing hose with a len
压力侧漏是在室温摄氏18--28度用水进行的,试验物品是60毫米的弹簧钢片卡子,试验是在场地进行的,检测棒一根,10米长水龙带一根,和需要检测的弹簧钢片卡子,压力侧漏要用下面提到的成套管件进行,为了方便组装,管件直径要与皮龙内径相配,直径重叠不得大于0.5毫米(管件直径大于皮龙内径不得超过0.5毫米),皮龙材质是EPDM高强度纤维,硬度标准65.
The leakage pressure testing is performed with water at room temperature(18-28°C)。For spring band clamps with a nominal of up to 60mm the test combination(pictre 4) includes one ground, beadless testi...
全部展开
The leakage pressure testing is performed with water at room temperature(18-28°C)。For spring band clamps with a nominal of up to 60mm the test combination(pictre 4) includes one ground, beadless testing mandrel, one testing hose with a length of 10mm and the to be tested spring band clamp. The leakage pressure test needs to be performed with the hose-fitting-combination mentioned below. In order to get a interference fit, the fitting diameter has to be adjusted to the inside diameter of the hose, The overlapping of the diameter should not exceed a maximum of 0.5mm. EPDM hoses-hoses with an aramide texture and a hardness of 65 +/- Shore A-are being used.
压力测试进行泄漏室温水18-28°C),一个命名,春天带夹子60毫米的测试组合(pictre 4)包括一个地面,beadless测试,测试软管芯棒的长度,使得测试春天乐队夹。泄漏需要进行水压试验与hose-fitting-combination下面提到。为了得到一干涉配合,适宜的直径有加以调整,以的内径软管、交叉的最大直径不应超过0.5毫米的。三元乙丙橡胶(EPDM)hoses-hoses与aramide硬度的纹理和海岸+ / - 65岁以上的人是被用。
收起